IP路由命令:displayospfv3interface
display ospfv3 interface
display ospfv3 interface [ interface-type interface-number ]
所有视图
interface-type interface-number:接口类型和接口号。
display ospfv3 interface命令用来查看OSPFv3的接口信息。
# 显示GigabitEthernet1/0/0接口的OSPFv3信息。
GigabitEthernet1/0/0 is up, line protocol is up
IPv6 Prefixes
2000:1::1
Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562
No designated router on this link
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Neighbor Count is 1, Adjacent neighbor count is 1
编辑推荐:
温馨提示:因考试政策、内容不断变化与调整,长理培训网站提供的以上信息仅供参考,如有异议,请考生以权威部门公布的内容为准! (责任编辑:长理培训)
点击加载更多评论>>