When securing a flash-type evaporator for an extended period of time, you should ______.

试卷相关题目

• 1When a vacuum boiling evaporator works, the hot jacket water will pass over the tube stack and ___ the sea water passing through the tubes.

  A.dispose

  B.dissolve

  C.heat

  D.dissipates

  开始考试点击查看答案
• 2Dirty oil must be _____ before being used again.

  A.mixed with clean oil

  B.purified

  C.heated

  D.strained

  开始考试点击查看答案
• 3Great care is dedicated to the removal of _____ from the scavenge air.

  A.gravity

  B.viscosity

  C.density

  D.humidity

  开始考试点击查看答案
• 4Most marine biological sewage treatment plants consist of all the following statements except ______.

  A.aeration tanks

  B.settling tanks

  C.disinfection agent

  D.anaerobic bacteria (厌氧菌)

  开始考试点击查看答案
• 5The oil sludge is burnt in the ______onboard. I’ll show you the ashes.

  A.boiler

  B.main engine

  C.auxiliary engine

  D.incinerator

  开始考试点击查看答案
• 6Among the basic categories of equipment, which of the following are used to allow the hydraulic energy to be controlled、

  A.hydraulic pumps

  B.valves

  C.hydraulic cylinders

  D.hydraulic motors

  开始考试点击查看答案
• 7Positive displacement, helical gear(斜齿轮) pumps are well suited for pumping oil because ______.

  A.stuffing boxes eliminate the leakage problems usually associated with other gear pumps

  B.it is not necessary to closely maintain design clearances with this pump

  C.they are essentially self-priming and produce a high suction lift

  D.these pumps are designed with extreme tooth angles

  开始考试点击查看答案
• 8The oil in a cargo winch gear box should be sampled periodically(周期性地) to ______.

  A.prevent the gear box from leaking

  B.prevent the oil from becoming inflammable(易燃的)

  C.make sure it has not become contaminated(污染)

  D.make sure the motor bearings are lubricated

  开始考试点击查看答案
• 9If an anchor windlass has been idle for some time, you should ______.

  A.repack all valve stems

  B.lubricate it prior to use

  C.replace the foundation bolts

  D.balance the warping heads

  开始考试点击查看答案
• 10A mooring winch should be equipped with mechanical brakes capable of holding ______.

  A.half the breaking strength of the mooring line

  B.the full breaking strength of the mooring line

  C.the maximum expected tension(张力) of the mooring line

  D.50% over the working tension of the mooring line

  开始考试点击查看答案